Wishlist

This product has been disabled.

This product is no longer active. Perhaps you should search our shop for other similar products.

Questions?

In order to assist us in reducing spam, please type the characters you see:
Princess Products
 

CLICK HERE to view important information

Princess® is a viscoelastic solution to replenish the loss of hyaluronic acid due to ageing, to improve hydration, tone and elasticity of the skin and to act as a hydrophilic filler for small lines such as crow’s feet, smile lines or smoke lines surrounding the mouth, décolleté, and the back of aging hands.
 
It is indicated to be introduced into the superficial dermal tissue via a dermal needling procedure. This treatment uses advanced monophasic and reticulated technology of non-cross linked stabilised hyaluronic acid which naturally occurs in the body and breaks down with aging, combined with highly concentrated glycerol to get better dermal needling results than any other product on the market.
 
No matter how sophisticated a skin care routine may be, facial volume is inevitably lost as the body ages, and beautiful, youthful appearance cannot be re-established unless this volume is replaced. Princess Rich is designed to replace the lost volume and achieve the natural beautiful look.
 
Treatment is not recommended in case of:

  • Known persistent hypersensitivity to hyaluronic acid
  • Autoimmune disorders
  • Pregnancy or breast-feeding
  • Simultaneous peeling or laser treatment
  • Skin infections
About Skin Ageing
 
There are two main causes for the ageing process:
  • Intrinsic factors which means genetics endowments determining the pace of ageing. 
  • Extrinsic factors, which we can influence to a certain extent, such as our lifestyle (smoking, stress, nutrition habits, leisure activities), our facial expressions and most important our exposure to sun and UV radiation.  

What Princess® Can Do For You
Princess® Rich filler can:
·      Reduce the appearance of superficial lines
·      Add volume, hydrate and rejuvenate your skin 
·      Improve tone and elasticity of your skin

Princess Fillers:
Fillers are most often used for correcting wrinkles and furrows, restoring volume to hollows and for facial sculpting. Common uses include filling facial hollows and troughs produced by the ageing process or depressed injury, surgical or acne scars; lifting the outer eyebrows and creating higher, more youthful cheekbones; and adding volume and definition to the lips. filler aces-126-417
  Benefits of Princess Fillers:

The key role of Hyaluronic Acid
Hyaluronic acid (HA), a natural element of our body, fulfils important functions such as maintaining moisture, firmness and elasticity in the skin. Environmental factors such as excessive and intensive sun exposure, and the natural ageing process contribute to the depletion in the body’s own level of hyaluronic acid. The skin becomes drier, thinner, and loses suppleness and elasticity. Lines and wrinkles appear. Volume decreases and changes the overall harmony of the face.
 
Apart from moisturising and hydrating the skin plus the smoothing-out of wrinkles, the increase of hydration in the skin is of critical importance as it helps in getting essential nutrition to the skin cells, as well as providing the vehicle for proper waste removal from the cells as it helps to increase the amount of water held in the extracellular matrix of the skin.
This is an important point – as it not only supremely hydrates the skin, but also assists with the proper functioning of the actual cells in the skin and has a structure stabilizing function as well.
As stated previously, hyaluronic acid is naturally present in the skin, but as we age the percentage of hyaluronic acid in the skin decreases, which also accounts for the loss of hydration and moisture in the skin. The decrease of hyaluronic acid starts at around the age of 20, but becomes apparent when people get into their 30s and 40s. The decrease also affects the way that the skin operates and ultimately results in wrinkling and loss of elasticity and a decrease of collagen – the support of the skin. Furthermore, it negatively impacts on the fibroblasts of the skin – and this leads to even less collagen being made, which also cause the skin to become far less elastic. An enzyme action in the skin – hyaluronidase – breaks down hyaluronic acid, and for this reason it needs to be replenished if strong, supple smooth skin is to be maintained.
The Key role of Glycerol
 
Glycerol is used for both cosmetic purposes and as a treatment for medical conditions of the skin. It is what is called a humectant, meaning it attracts water and maintains hydration on an intercellular level making the skin not only moist, but soft and supple to the touch. Glycerol promotes skin cell maturation, signally the cell to mature in a normal fashion rather than too quickly interrupting any abnormal process which allows the cell to reach full maturation before shedding. Glycerol can also help to heal wounds.
The combination of these two natural substances in a stabilised form offer an extremely safe alternative to more invasive treatments.
Safety:

  1. Princess® products are based on hyaluronic acid (HA) of non-animal origin, thus hypoallergenic. That means no allergy testing is required previously to the treatment.
  2. The products are manufactured in Austria with a unique technology according to highest safety standards. The gels are absolutely pure, controlled and extremely well tolerated in the body.
  3. The treatment's results are immediately visible and long–lasting but not permanent.
  4. The formulations are absorbable and show an effect for several months depending on the treatment area, the injection technique and your skin type.
  5. Like other products of the Princess line, the Princess Rich gel is biodegradable.
  6. Thanks to CROMA’s unique purification process and sterilization, limited risks of side effects or inflammation are guaranteed.
  7. Because hyaluronic acid is a natural substance found throughout the body, allergic reactions are very rare.
The manufacturer CROMA takes pride in maintaining the complete ownership of the development of this product – design, manufacturing, primary and secondary packaging, labelling inspection, final inspection, moist heat sterilization and release – in contrast to most competitors in the aesthetic market.
Princess Volume and Princess Filler are not available for use by beauty therapists.
Matrix Metalloproteinase (MMPs) 
 
Both UVR and dermal needling trigger MMPs. MMPs break down old connective tissue structures and inhibit collagen production when in high levels, to spur the formation of new collagen. Initially with needling there will be some erythema/inflammation which is in response to the controlled injury. MMPs will continue to increase post treatment as part of wound healing and begin to decline again after approximately 14 days. Then the remodelling process begins during which hyaluronic acid and new collagen and elastin fibres are produced.
 
If MMPs are not controlled - instead of stimulating collagen production, collagen destruction will occur. Therefore MMPs must be controlled during treatment with dermal needling and Princess Rich for optimal results for your client. To inhibit prolonged stimulation during this course UVR must be avoided as much as possible through the use of sunblock. To further prevent the prolonged stimulation of MMPs topical treatments for controlling MMP activity should be started prior to treatment at home and continued during the course.
 
MMP Inhibitors (A-FIX, C-FIX, AGEFIX and SUNFIX)
When MMP activity is turned on, collagen synthesis shuts down. If MMPs are not controlled - instead of stimulating collagen production, collagen destruction will occur. So for best results while stimulating collagen, elastin, and Hyaluronic Acid biosynthesis MMPs should be controlled, by the client using the following ingredients before, during and after Dermal Needling treatments.
 
  • Peptides (Argireline, Peptides, Matrixyl 3000, Matrixyl S 6, Tripeptide, Glycan Booster Peptide)
Products to use: SkincareRX AGEFIX- Multi Peptide Stem cell Complex
AGEFIX multi peptide stem cell complex
  • Vitamin A & C
Products to use: SkincareRX C-FIX and A-FIX
A-FIX Renewal ComplexC-FIX concentrated crystals 
  • Green Tea
Products to use: Princess Green Tea Mask
What is a Dermal Filler?
Dermal Fillers are products that are designed to contour, create volume, fill lines and hydrate the skin. Our product range consists of dermal fillers for the treatment of lips, facial lines, wrinkles and facial folds. The results are immediate.
How long will the results last?
Dermal Fillers can last anywhere from 6-12 months. With one re-treatment; the results can last up to 18 months.
Does the treatment hurt?
Dermal Filler treatments are administered by a qualified Health Care Professionals. You may experience some discomfort, however this can be minimised by local anaesthetic and topical creams. You can discuss this with your practitioner prior to the treatment.
How long does the treatment take?
Dermal Filler treatments usually take around 30 minutes.
What are the side effects?
The most common side effects are redness, tenderness and swelling after the treatment which usually subsides within 2-3 days. Occasional bruising can occur which can be covered by make-up.
What will I look like if I decide not to have another treatment?
If you decide not to have another treatment your skin will return to its natural pre-treatment condition.
 
    Princess® Rich Superficial Filler 
    This superficial cosmetic filler is injected into the upper skin layer. It is a non-surgical cosmetic medicine       
     treatment that employs multiple injections of cross-linked hyaluronic acid and glycerol through dermal
     needling.
      
In Indications:
    Fine lines, crow’s feet, smile lines, hydration, tone and elasticity.   
      
    Needling depth:
    Superficial dermis
 
    Concentration and Stabilisation:
    Medical Grade 1.8% Hyaluronic Acid (18mg/ml) / Glycerol (20mg/ml)
 
     Reticulating Agent:
     Glycerol
 
     Other Ingredients:
     Phosphate-citrate-buffer
 
     Dynamic Viscosity:
>   20.000mPa.s (at shear rate 5s+1)
     
A  Application method:
    The procedure takes from 30-60min. The preparation is applied trans-dermally via a dermal needle device.   
    The application causes a slight burning sensation, which soon subsides.
 
T   Treatments Required to Achieve Maximum Effect: 
      3 sessions / 3-4 week intervals. Optimal levels in combination with collagen induction therapy is designed to
      increase long lasting superficial volume and hydration while there is a long term effect on collagen and 
      elastic regeneration to reverse visible aging.  
     
     Areas of Application:
     Full facial rejuvenation and rehydration
     Temples, eyelids and the area around the eyes or mouth
     Neck and décolletage or the backs of the hands
 
     Treatment is not recommended in case of:
     Known persistent hypersensitivity to hyaluronic acid Autoimmune disorders
     Pregnancy or breast-feeding    
     Simultaneous peeling or laser treatment
     Skin infections
0
Can't find what you are looking for? We pride ourselves to be the experts in sourcing the best products to suit our clients' needs, just send us a request by clicking here and we will go out of our way to assist you

You may also like

NEW
SPECIAL OFFER
Tattoo Removal Laser

Tattoo Removal Laser

SKU: 206-1014336
Please Enquire about this Product
NEW
NEW
×

Thank you very much. Your details are now saved to our database.